GE Lumination
Lumination
Literature Library | Where to Buy | My Account | Contact Us | Home


Home
Education
Tools
Tetra Energy Savings Calculator
Tetra Parts List Generator
Tetra Contour Parts List Generator
Luminance Calculator
Illuminance Calculator
Tetra Contour Parts List Generator  
The Tetra Contour LED System replaces older technologies such as neon lighting in interior and exterior signage, architectural and accent lighting applications, while delivering long-life, reduced maintenance and up to 40% energy cost savings.

Please use the Tetra Contour Parts List Generator to create an estimated parts list for your specific project. Please note that this tool only produces an approximation, and should not be a sole source of information for forecasting project costs. Actual parts requirements can vary.

For a detailed material estimate based on your actual layout, please complete our online request form or contact Technical Support at
1-888-MY-GE-LED.

Instructions:
In the white boxes below, please
1. Select feet or meters
2. Select LED color
3. Select power supply
4. Enter the amount of footage needed


Tetra Contour Parts List Generator

Generates an estimated component parts list for a complete Tetra Contour solution

Power Supply Note Box
Supports all colors!
Damp Location Rated: Can be mounted in a raceway or Letter.
GEXNPS30 Supports from 4 to 24'
GEXNPS31 Supports from 1' to 4'
A Maximum of 15' of Supply Wire can be used.
Select Calculation Units
Select the LED Light Engine Color
Select the Light Guide, Connector, and End cap
Choose a Power Supply
Enter footage for this job

 

*The Light Engine can only be cut in increments of 8/3 inches (6.77cm). Letter sizes or shapes may need to be adjusted so that the total length of the Light Engine is an increment of 8/3 inches (6.77cm).